Arrêt de service programmé du vendredi 10 juin 16h jusqu’au lundi 13 juin 9h. Pour en savoir plus
Accéder directement au contenu Accéder directement à la navigation
Article dans une revue

Six-Phase Induction Machine Model for Electrical Fault Simulation Using the Circuit-Oriented Method

Abstract : The aim of this paper is to present a six-phase induction machine (6PIM) model based on the so-called circuit-oriented approach suitable for simulation of electrical faults on both stator and rotor sides. This specific model has been developed by using only resistances, inductances, and controlled voltage sources. The coupling effects between both the stator and the rotor have been taken into account by the computation of stator-rotor mutual inductances. The model has been developed under the MATLAB/Simulink environment in order to have a universal tool that is easy to use with any control techniques. With this model, it is possible to simulate any type of electrical faults during the motion by closing or opening corresponding switches. The performances of the model have been validated by comparing simulation and experimental results of a 90-W 14-V 50-Hz two-pole 6PIM operating with different levels of load torque in healthy and faulty modes. Furthermore, this model has been associated to a faulttolerant speed control method in phase opening occurrences in order to test the model accuracy.
Type de document :
Article dans une revue
Liste complète des métadonnées
Contributeur : Louise Dessaivre Connectez-vous pour contacter le contributeur
Soumis le : lundi 4 avril 2022 - 16:19:09
Dernière modification le : mercredi 27 avril 2022 - 03:46:22



Alin Pantea, Amine Yazidi, Franck Betin, Mehdi Taherzadeh, Sébastien Carrière, et al.. Six-Phase Induction Machine Model for Electrical Fault Simulation Using the Circuit-Oriented Method. IEEE Transactions on Industrial Electronics, Institute of Electrical and Electronics Engineers, 2016, 63 (1), pp.494-503. ⟨10.1109/TIE.2015.2493727⟩. ⟨hal-03629913⟩



Consultations de la notice